Electric Hydraulic Edge-O-Dock Leveler
FOB: Midwest Warehouse
The Electric Hydraulic Edge-O-Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. 115V, 1 phase power standard. Unit comes complete with motor, pump, control box, cylinder, lines, and oil. Truck must pull out for leveler to return to stored position.
The Edge-O-Dock Leveler permanently attaches to face of dock. It is recommended for docks to be at least 48" high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. The leveler comes complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping is 27", with a 36" ramping length available for smaller grade. A steel dock edge or approach ramp is required for proper installation.
Note: -36 at end of model number below denotes 36" ramping length for smaller grade.
Additional Note: Overall width is usable width plus 27".
Vestil model numbers in red ship within 48 hours
- Model Info