Mechanical Edge-O-Dock Leveler
FOB: Midwest Warehouse
The Mechanical Edge-O-Dock Leveler is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.
Dock levelers permanently attach to face of the dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required.
Standard Dock Leveler Features:
- Comes complete with 2" x 8" x 18" bumpers and installation instructions.
- Standard ramping is twenty-seven (27) inches, with a thirty-six (36) inch long ramping length available for a smaller grade.
- Each unit provides a service range of five (5) inch above the dock and five (5) inch below dock height.
- A steel dock edge or approach ramp is required for proper installation.
- Model Info